RunwayBriefAviation weather

RunwayBrief / Guides

How to read a TAF

A TAF is the forecast for an airport. It uses the same codes as a METAR, with a few extra groups that say when the weather is expected to change.

A worked example

This forecast is the example the FAA uses in its own key to METAR and TAF:

TAF KPIT 091730Z 0918/1024 15005KT 5SM HZ FEW020 WS010/31022KT
  FM091930 30015G25KT 3SM SHRA OVC015
  TEMPO 0920/0922 1/2SM +TSRA OVC008CB
  FM100100 27008KT 5SM SHRA BKN020 OVC040
  PROB30 1004/1007 1SM -RA BR
  FM101015 18005KT 6SM -SHRA OVC020
  BECMG 1013/1015 P6SM NSW SKC

The first line

GroupMeaning
TAFA routine forecast. TAF AMD is an amended one, issued when the current forecast no longer describes the weather.
KPITThe airport: Pittsburgh International.
091730ZIssued on the 9th at 17:30 UTC.
0918/1024Valid from 18:00 UTC on the 9th to 24:00 UTC on the 10th. Each half is a two-digit date and a two-digit hour.
15005KT 5SM HZ FEW020The forecast at the start: wind from 150° at 5 knots, visibility 5 statute miles in haze, a few clouds at 2,000 ft.
WS010/31022KTLow-level wind shear: at 1,000 ft the wind is from 310° at 22 knots.

Most airports have a 24-hour TAF. A select number have a 30-hour TAF, as this one does.

The change groups

Each line after the first begins with a change group. There are four.

GroupMeaning
FM091930From. A rapid change, usually in less than an hour, to a new set of prevailing conditions. The six digits are the date, hour and minute: from 19:30 UTC on the 9th.
TEMPO 0920/0922Temporary. Conditions expected to last generally less than an hour at a time, and for less than half of the period given: between 20:00 and 22:00 UTC on the 9th.
PROB30 1004/1007Probability. A 30 to 39 percent chance of the thunderstorms or precipitation described, between 04:00 and 07:00 UTC on the 10th.
BECMG 1013/1015Becoming. A gradual change that happens during the period given: between 13:00 and 15:00 UTC on the 10th.

FM replaces everything that came before it. TEMPO and PROB30 sit on top of the prevailing forecast and list only what changes.

Take care with the date. FM100000 is 00:00 UTC on the 10th, not 10:00 UTC.

Two codes you only see in a TAF

Everything else (wind, visibility, weather and cloud codes) reads exactly as it does in a METAR. See How to read a METAR for the code tables.

The example, period by period

Putting a flight category on each period turns the forecast into a picture of the day.

Period (UTC)ForecastCategory
9th 18:005 miles in haze, few clouds at 2,000 ftMVFR
From 9th 19:30Wind 300° at 15 gusting 25, 3 miles in rain showers, overcast at 1,500 ftMVFR
Temporarily, 9th 20:00 to 22:001/2 mile in a thunderstorm with heavy rain, overcast at 800 ftLIFR
From 10th 01:005 miles in rain showers, broken at 2,000 ftMVFR
30% chance, 10th 04:00 to 07:001 mile in light rain and mistIFR
From 10th 10:156 miles in light rain showers, overcast at 2,000 ftMVFR
Becoming, 10th 13:00 to 15:00More than 6 miles, no significant weather, sky clearVFR

The categories follow the limits in VFR, MVFR, IFR and LIFR explained.

Who issues TAFs

In the United States, TAFs are prepared by National Weather Service forecast offices for over 700 airports, and amended as required. Many smaller airfields have a METAR but no TAF. In that case, look at the TAF for the nearest larger airport.

RunwayBrief does this decoding for you. Flight category, decoded METAR and TAF, and wind components for every runway, on iPhone and Apple Watch. Free to download.

Get RunwayBrief
Safety

This guide is for learning. It is not a substitute for flight training or an official weather briefing. Always obtain an official briefing and check authoritative sources before every flight.

Source: FAA Aeronautical Information Manual, Chapter 7, Section 1 (Meteorology). Published 15 November 2026.