RunwayBriefAviation weather

RunwayBrief / Guides

How to read a METAR

A METAR is a coded report of the weather observed at an airport. Every element sits in a fixed order, so once you know the order you can read any of them.

A worked example

This report is the example the FAA uses in its own key to METAR and TAF:

METAR KPIT 091955Z COR 22015G25KT 3/4SM R28L/2600FT TSRA OVC010CB 18/16 A2992 RMK SLP045 T01820159

GroupMeaning
METARType of report. METAR is the routine report; SPECI is a special report issued between routine ones.
KPITThe station, as a four-letter ICAO identifier. This one is Pittsburgh International.
091955ZDate and time: the 9th day of the month at 19:55 UTC. All times are UTC, marked Z.
CORA corrected report. You will more often see AUTO here, meaning an automated report with no human intervention.
22015G25KTWind from 220° at 15 knots, gusting to 25 knots.
3/4SMVisibility three-quarters of a statute mile.
R28L/2600FTRunway visual range on runway 28 Left is 2,600 ft.
TSRAThunderstorm with moderate rain.
OVC010CBOvercast at 1,000 ft above ground, with cumulonimbus.
18/16Temperature 18 °C, dew point 16 °C.
A2992Altimeter setting 29.92 inches of mercury.
RMK SLP045 T01820159Remarks: sea-level pressure 1004.5 hPa; temperature 18.2 °C and dew point 15.9 °C to the nearest tenth.

With a ceiling of 1,000 ft and visibility below 1 mile, this airport is LIFR. The visibility is the lower of the two, so it sets the category. See VFR, MVFR, IFR and LIFR explained.

The order of a METAR

A METAR always lists its elements in this order. If an element is not reported, it is simply left out.

  1. Type of report
  2. Station identifier
  3. Date and time
  4. Modifier (AUTO or COR), when needed
  5. Wind
  6. Visibility
  7. Runway visual range, when reported
  8. Weather
  9. Sky condition
  10. Temperature and dew point
  11. Altimeter
  12. Remarks

Wind

The first three digits are the direction the wind is blowing from, in tens of degrees referenced to true north. The next two digits are the speed in knots (three digits above 99 knots). A G followed by a number is the highest gust.

If the direction varies by 60° or more and the speed is above 6 knots, a second group gives the range, for example 180V260.

To turn a reported wind into headwind and crosswind for a runway, use the free crosswind calculator.

Visibility

In the United States, prevailing visibility is in statute miles, with SM after the number: 7SM, 1/2SM. Automated stations report 10 miles or more as 10SM. Outside the United States, visibility is usually a four-digit number in meters.

Weather

Weather groups are built from an intensity, a descriptor and one or more phenomena. -SHRA is light rain showers; +TSRA is a thunderstorm with heavy rain.

PartCodes
Intensity or proximity- light · no sign, moderate · + heavy · VC in the vicinity
DescriptorBC patches · BL blowing · DR drifting · FZ freezing · MI shallow · PR partial · SH showers · TS thunderstorm
PrecipitationDZ drizzle · RA rain · SN snow · SG snow grains · IC ice crystals · PL ice pellets · GR hail · GS small hail or snow pellets · UP unknown precipitation (automated)
ObscurationBR mist · FG fog · FU smoke · HZ haze · DU widespread dust · SA sand · PY spray · VA volcanic ash

Mist (BR) is reported when visibility is 5/8 of a mile or more; below that it is fog (FG).

Sky condition

Each cloud layer is an amount followed by its height in hundreds of feet above the ground. BKN030 is a broken layer at 3,000 ft.

CodeMeaningSky covered
SKC / CLRClear. CLR is used by automated stations and means no clouds below 12,000 ft.0
FEWFewMore than 0 to 2/8
SCTScattered3/8 to 4/8
BKNBroken5/8 to 7/8
OVCOvercast8/8
VVVertical visibility into an obscured sky, for example VV004Obscured

The ceiling is the height of the lowest layer reported as broken, overcast or obscured. Few and scattered layers are not a ceiling. CB (cumulonimbus) or TCU (towering cumulus) is added to a layer when present.

Temperature, dew point and altimeter

Temperature and dew point are in whole degrees Celsius, separated by a slash. An M means minus: M06 is −6 °C.

In the United States the altimeter setting starts with A and is in inches of mercury: A2995 is 29.95. Elsewhere it starts with Q and is in hectopascals: Q1013.

The spread between temperature and dew point is what a cloud base calculator uses to estimate where cloud will form.

Remarks

RMK starts the remarks. They add detail that does not fit the body of the report, such as sea-level pressure (SLP) and the temperature to the nearest tenth of a degree (the T group).

Next

A METAR tells you what the weather is now. For what is forecast, read How to read a TAF.

RunwayBrief does this decoding for you. Flight category, decoded METAR and TAF, and wind components for every runway, on iPhone and Apple Watch. Free to download.

Get RunwayBrief
Safety

This guide is for learning. It is not a substitute for flight training or an official weather briefing. Always obtain an official briefing and check authoritative sources before every flight.

Source: FAA Aeronautical Information Manual, Chapter 7, Section 1 (Meteorology). Published 15 November 2026.